Many international students in Australia ask the same question: "If I study a trade course here, what happens next?" For a lot of trades, the answer runs through one government program called the Job Ready Program, run by Trades Recognition Australia (TRA).
This is the full guide, step by step. Every fee, form and deadline comes from the official TRA guidelines and Home Affairs pages, and we link to each one at the end. We will cover each trade separately in later guides. This one explains how the whole pathway works, using Carpentry as the example.
The route at a glance
- 1.Complete an Australian trade course at a CRICOS-registered provider.
- 2.Apply for a Provisional Skills Assessment (PSA) from TRA.
- 3.Hold a visa that lets you work in Australia. The Provisional Skills Assessment is designed around the Temporary Graduate visa (subclass 485), Post-Vocational Education Work stream, for those who qualify, but TRA's guidelines do not say the 485 is required for the Job Ready Program.
- 4.Start the Job Ready Program (JRP) while working in your trade in Australia.
- 5.Finish the JRP and receive your skills assessment outcome letter.
- 6.Use that letter with Home Affairs to apply for a skilled visa.
The Job Ready Program is a minimum 12-month, employment-based skills assessment for international graduates of an Australian vocational (VET) course who are working in Australia and seeking a pathway to a skilled visa. (TRA: Job Ready Program)
Is it the only route? No. TRA also runs a Migration Skills Assessment Program for people applying for skilled migration visas. It is documentary-based, costs $795 and takes about 120 days, but it needs proof of at least 3 years of paid work in your occupation, including at least 12 months in the 3 years before you apply. TRA says it is not open to people applying for a 485 or a 482 visa, or in the four licensed occupations listed in the next section. So for a recent graduate, the Job Ready Program is usually the relevant TRA program, while the Migration Skills Assessment suits people who already have the work history. TRA's Pathfinder tool helps you check which program applies to you. (TRA: Migration Skills Assessment Program guidelines and FAQs)
Do you need the Job Ready Program just to get a 485? No. Home Affairs asks for a skills assessment for your occupation, or evidence that you have applied for one, and TRA's guidelines describe the Provisional Skills Assessment as the first step toward the 485. The Job Ready Program comes later. (Home Affairs: 485 PVEW and TRA: PSA Guidelines)
Before you start: is your trade eligible?
Check three things first.
- •TRA must be the assessing authority for your trade. TRA publishes a list of the Australian qualification for each occupation it assesses. For example, TRA lists the Certificate III in Carpentry (CPC30220) for both Carpenter (ANZSCO 331212) and Carpenter and Joiner (ANZSCO 331211). (TRA: Australian Qualifications By Occupation)
- •Some trades cannot use the Job Ready Program. TRA says these licensed occupations are not eligible: Electrician (General and Special Class), Plumber (General) and Air-conditioning and Refrigeration Mechanic. (TRA: JRP Guidelines)
- •Your trade must be on the skilled occupation list for the visa you want. For the 485 Post-Vocational Education Work stream, Home Affairs says you must nominate an occupation on the Medium and Long-term Strategic Skills List (MLTSSL). Check the current list yourself. (Home Affairs: skilled occupation list)
TRA also reminds applicants to check with Home Affairs that their visa pathway needs a skills assessment, and says it is your responsibility to keep a valid visa for the whole time you are in the program. (TRA: JRP Guidelines)
Step 1: Complete your trade course in Australia
For TRA to accept your qualification in the Provisional Skills Assessment, it must (TRA: PSA Guidelines):
- •be issued by a CRICOS-registered training provider (RTO),
- •be completed in Australia,
- •match the occupation you nominate, and
- •be dated before the date you apply.
TRA will not accept qualifications that include units from recognition of prior learning (RPL), or credit transfers based on RPL. If your transcript shows RPL, your application can be unsuccessful. (TRA: PSA Guidelines)
Tip: Before you enrol, ask your provider in writing whether your course includes any RPL or credit, and whether it matches TRA's listed qualification for your trade.
Step 2: If you plan to use the 485, check its study rules
The 485 is optional. If you plan to apply for the Temporary Graduate visa (485), Post-Vocational Education Work stream, Home Affairs sets its own study requirement. Read it before you choose your course. Key points from Home Affairs:
- •You must have completed the qualification in the 6 months immediately before you apply. (Home Affairs: study requirement)
- •You need at least 2 academic years of study, which Home Affairs defines as 92 weeks, counted from the course's CRICOS-registered duration, and not less than 16 calendar months studied in Australia. (Home Affairs: study requirement)
- •You can use more than one course to reach 92 weeks, but each course you use must be closely related to your nominated occupation. (Home Affairs: 485 PVEW, eligibility)
- •You must be 35 or under when you apply (exceptions apply, for example Hong Kong and British National Overseas passport holders can be under 50), be in Australia, and have held a student visa in the last 6 months. (Home Affairs: 485 PVEW, eligibility)
This matters for course choice. A short course may not reach 92 weeks on its own, so check the CRICOS-registered duration of your course. If you are already studying something unrelated, such as a Master's degree, Home Affairs says each course you rely on must be closely related to your trade, so the unrelated course does not help you here.
Step 3: Apply for your Provisional Skills Assessment (PSA)
The PSA is the first TRA step. TRA calls it the first step for recent international graduates who want to apply for the 485 Post-Vocational Education Work stream, and it is compulsory before you can register for the Job Ready Program. (TRA: PSA Guidelines)
| Item | What TRA says |
|---|---|
| Fee | $130 AUD |
| Time | About 12 weeks after you submit complete documents |
| Valid for | 3 years from the date on your outcome letter |
| Review if unsuccessful | $130 extra |
You apply through TRA's online portal and upload (TRA: PSA Guidelines):
- •your passport identification page (and proof of any name change),
- •your Australian qualification certificate for your trade,
- •your complete academic transcript (all units, results and your study start date),
- •if relevant, your old passport, transcripts for any credit transfers, and your USI report (your full Australian study record).
Documents must be clear PDF scans, not shared through Google Drive or Dropbox, not password protected, and under 90MB in total.
Important: Your PSA outcome letter can be used to apply for the 485 and to register for the JRP. The occupation on your PSA must match the occupation in your JRP application. If your PSA expires before you register for the JRP, you must create a new account and apply for a new PSA. (TRA: PSA Guidelines)
Step 4: Hold a visa that lets you work (the 485 is the common option)
The Job Ready Program needs you to be working in your trade in Australia, and TRA says it is your responsibility to keep a valid visa for the whole program. TRA's guidelines do not say the visa must be a 485. The 485 is the option the Provisional Skills Assessment is designed around, but not everyone qualifies for it (for example, you must be 35 or under, and meet the study rule in Step 2, as the Home Affairs page lists). If you do not qualify, speak to a registered migration agent about which other visa lets you stay and work, because we have not covered that here.
If you use the 485, Home Affairs describes the Post-Vocational Education Work stream as a visa for recent graduates with an associate degree, diploma or trade qualification relevant to an occupation Australia needs. Key facts from the Home Affairs page:
- •It allows you to stay up to 18 months. It cannot be extended. (Home Affairs: 485 PVEW, about this visa)
- •You must find your own employment once it is granted.
- •When you apply you must give your valid skills assessment, or evidence that you have applied for one, plus evidence of health insurance, a police check application and English proof.
- •It starts from AUD 5,750 for the main applicant. Use Home Affairs' Visa Pricing Estimator for your exact cost.
- •From 13 November 2026, new rules limit which family members you can include. Read our guide to the 485 family member changes.
Home Affairs does not do pre-lodgement checks on the study requirement, so be certain you meet it before you apply. (Home Affairs: 485 PVEW)
Step 5: Start the Job Ready Program
The JRP has three steps, and you must finish each before the next. You must complete the whole program within 3 years of your Start Date, or the assessment is unsuccessful and you must reapply and pay standard fees again. You use the same online portal account you created for your PSA. (TRA: JRP Guidelines)
JRP Step 1: Job Ready Employment ($490)
To apply you need (TRA: JRP Guidelines):
- •a successful PSA for your trade, applied within 3 years of your PSA outcome date,
- •a current passport,
- •a job in your nominated occupation, with at least 3 weeks of pay evidence,
- •an Employment Verification Report signed by your employer or supervisor.
Your Start Date is the day you submit this application, although it can move earlier if your Prior Employment claim is accepted. TRA registration takes up to 30 days. (TRA: JRP Guidelines)
Key rules for this step:
- •Full-time means an average of 38 hours a week. Less than that is counted pro rata, so part-time work, unemployment or extended leave (more than 4 weeks) makes the program take longer.
- •You can claim up to 3 months of Prior Employment with your current employer, which can shorten the 12-month minimum, but only at the time you apply. You cannot add or change the claim afterwards.
- •You can register more than one employer, up to 5 across the program, each with its own verification report and pay evidence.
- •Subcontractor work may be considered if you complete at least 6 months full-time equivalent with one contractor who is willing to sign your reports. Subcontractors provide invoices and bank statements as pay evidence.
- •After about 6 months of full-time (or equivalent) work, TRA emails you, and you submit an Employment Confirmation Form and a Skills Progress Report. Your employer or supervisor signs the Skills Progress Report. If TRA is satisfied, it invites you to the next step.
JRP Step 2: Job Ready Workplace Assessment ($2,845)
You apply only after TRA invites you, and you pay the fee and upload a Workplace Assessment Confirmation Form (your details, your supervisor's details, your workplace, and availability for the next 8 weeks).
A TRA-approved RTO assessor then contacts you and assesses you at your workplace, using methods that can include an interview and observation of your practical skills. TRA says the assessment looks at whether you:
- •understand your job well,
- •can handle routine and complex tasks and suggest improvements,
- •are reliable and responsible,
- •work safely, efficiently and communicate to industry standards.
The assessment takes up to 15 weeks. The result is either Job Ready or Not Yet Job Ready. If you are Not Yet Job Ready, you apply for a subsequent assessment with a new Skills Progress Report and Confirmation Form, and another $2,845 fee. TRA says you may need more experience or training, and if a later assessment is also unsuccessful you may need to meet extra criteria, which can include 3 more months of employment evidence. If you disagree with a Not Yet Job Ready result, you can request a review within 28 days of the outcome. (TRA: JRP Guidelines)
Even after you pass, you must keep working in your trade to finish the minimum 12 months of full-time (or equivalent) experience.
JRP Step 3: Job Ready Final Assessment ($75)
Once you have passed the Workplace Assessment and completed the minimum employment, TRA invites you to apply. You submit:
- •a completed 12-month Employment Confirmation Form,
- •your current passport identification page,
- •pay evidence that you were still employed with your registered employer 12 months from your Start Date (you do not need 12 months of payslips).
TRA issues your Skills Assessment Outcome letter within 14 days of receiving your application and payment. TRA says this letter is not a qualification or formal accreditation, but official recognition of your skills and experience in your trade in an Australian workplace. It can be used to apply to Home Affairs for a skilled visa. (TRA: JRP Guidelines)
What it costs
| Item | Fee (AUD) |
|---|---|
| Provisional Skills Assessment | $130 |
| JRP Step 1: Job Ready Employment | $490 |
| JRP Step 2: Workplace Assessment | $2,845 |
| JRP Step 3: Final Assessment | $75 |
| TRA total if everything goes first time | $3,540 |
| Extra Workplace Assessment, if needed | $2,845 |
Sources: TRA: PSA Guidelines and TRA: JRP Guidelines. TRA's fees can change, and TRA says it publishes changes on its website. The 485 visa charge and your course fees are separate.
Rules that catch people out
- •Tell TRA about changes on time. Contact details, name, passport, working hours, your authorised representative or a long leave period must be reported within 14 calendar days. A change of employer or role must be reported within 28 calendar days. Late notice can delay your application. (TRA: JRP Guidelines)
- •Keep every payslip and signed form. Your documents must be "decision ready" (all fields filled, all evidence and fees provided) or the process can be delayed.
- •Hide sensitive information. TRA asks you to remove your Tax File Number, bank details and unrelated transactions from documents before you upload.
- •Stay in your nominated occupation. TRA requires you to be employed in your Nominated Occupation, so check with your employer that your duties match your trade.
- •Keep your visa valid. TRA states this is your responsibility. If you rely on a 485 Post-Vocational Education Work visa, it lasts up to 18 months and cannot be extended, while the JRP needs a minimum of 12 months of full-time work and can take longer with part-time work or gaps. Plan the timing with a registered migration agent.
Example timeline (illustration only)
This example is not a real person and not a promise of any result. It shows how long the TRA steps can take.
Chidi finishes a Certificate III in Carpentry on 1 March 2027 at a CRICOS-registered provider, with no RPL on his transcript.
| When | What happens |
|---|---|
| Early March 2027 | Chidi applies for his PSA ($130). TRA says about 12 weeks after complete documents. |
| March to August 2027 | If he qualifies, he applies for the 485 within 6 months of finishing, giving evidence that he has applied for a skills assessment. |
| Once he holds a visa with work rights | He finds a carpentry employer, collects 3 weeks of pay evidence, and submits Job Ready Employment ($490). That date is his Start Date. |
| About 6 months after his Start Date | He submits his Employment Confirmation Form and Skills Progress Report. |
| After TRA's invitation | He applies for the Workplace Assessment ($2,845). An RTO assessor visits his workplace. TRA says up to 15 weeks. |
| 12 months after his Start Date, if full-time | He submits his final evidence ($75). |
| Within 14 days | TRA issues his Skills Assessment Outcome letter. |
If Chidi works part-time, takes extended leave or needs a second Workplace Assessment, the dates move later.
What the outcome letter does not do
The outcome letter is a skills assessment, not a visa and not permanent residence. Home Affairs decides skilled visa applications, and it has its own requirements, including whether your occupation is on the list for the visa you want. TRA's own guidelines say they do not cover visa or points requirements and refer applicants to Home Affairs. (TRA: JRP Guidelines) Nothing in this guide guarantees any outcome.
Planning to study a trade in Australia?
Choosing the right trade, provider and timing before you enrol makes a big difference. If you are a student already in Australia, our guide on adding a trade Certificate III while doing a Master's explains the waiting period and visa conditions. Get in touch with the Afrovo team and tell us your situation, and we can connect you with a MARA-registered migration agent before you commit to a course.
Official sources
- •TRA: Our programs
- •TRA: Job Ready Program
- •TRA: Job Ready Program Guidelines (page) and PDF, May 2026
- •TRA: Provisional Skills Assessment Program
- •TRA: PSA Program Guidelines (page) and PDF, May 2026
- •TRA: Migration Skills Assessment Program guidelines and FAQs
- •TRA: Australian Qualifications By Occupation
- •Home Affairs: Temporary Graduate visa (485), Post-Vocational Education Work stream
- •Home Affairs: Meeting the 485 study requirement
- •Home Affairs: Skilled occupation list
_General information only. This article is not legal or migration advice and is not a guarantee of any outcome, including any visa or permanent residence outcome. Fees, rules and lists are set by TRA and the Australian Government and can change at any time, so always confirm the current position on the official pages above. The example about Chidi is an illustration, not a real case. Last checked 22 November 2026. For guidance on your own situation, speak to the Afrovo team and our MARA-partnered registered migration agents._
Related guides
Ready to Start Your Australian Journey?
Message our AI bot on WhatsApp for a free, personalised visa assessment.
Book Free Consultation